) Не сложнее, чем в Винде.Serzhinio said:
Вариант: загружайся с установочного СД Мандрейки, и начинай установку. На каком-то этапе она скажет: "переустанавливаем всё или простое обновление".Serzhinio said:
ПжлстSerzhinio said:
# For which modems does the Linux driver support?
The Smart Link Linux driver supports:
* SmartRiser56 and SmartRiser561based AMR / CNR / MDC / ACR modem cards
* SmartPCI56, SmartPCI561 and SmartPCI562 based PCI modem cards
* SmartUSB56 based USB modem
# Does the Linux driver operate as open source?
Some of system dependent files are open sourced, not all.
# Can I use more than one Smart Link Soft Modem at once?
Yes.
# How do I install/un-install the Linux driver?
Please see the readme.txt file in the driver download section.
# In which development environment do I need to compile the driver?
The files that are included in the Linux kernel are required.
# Is it possible to use the modem with different kernels?
Yes, simply run 'Make Clean' and 'Make Install-AMR' (or 'Make Install-USB') with the new files included in the Linux kernel (without 'Make Uninstall').
# Why did the compilation fail after editing the makefile: 'KERNEL_INCLUDES=/usr/include'?
Many popular Linux distributor install files in the '/usr/include' directory Linux for application development. This directory can not be used for compilation with the kernel module. To correct, use the native Linux kernel header files. The '/usr/src/linux/include' directory is the most popular.
# What do I do if the modem does not dial when I enter the command /ATDT"phone number"/ and press twice on the enter key? (Instead, I get a "NO CARRIER" message with not enough time to dial).
All input during connection will break the session, regardless of the modem. To correct you may type: ATDT and press 'Enter' once to start the dialing process, and wait for the modem to answer ('CONNECT...' 'NO-CARRIER', 'BUSY', etc.).make uninstall
make uninstall -C drivers KERNEL_DIR=/usr/src/linux
make[1]: Entering directory `/usr/src/slmodem-2.9.10/drivers'
cc -I/usr/src/linux/include -o kernel-ver kernel-ver.c
rm -f /dev/slamr0 ; rm -f /dev/slamr1 ; rm -f /dev/slamr2 ; rm -f /dev/slamr3 ; echo -n
rm -f /dev/slusb0 ; rm -f /dev/slusb1 ; rm -f /dev/slusb2 ; rm -f /dev/slusb3 ; echo -n
make uninstall KERNEL_VER=2.6.3-4mdk
make[2]: Entering directory `/usr/src/slmodem-2.9.10/drivers'
modprobe -r slamr ; echo -n
modprobe -r slusb ; echo -n
rm -f /lib/modules/2.6.3-4mdk/extra/slamr.ko
rm -f /lib/modules/2.6.3-4mdk/extra/slusb.ko
/sbin/depmod -a
make[2]: Leaving directory `/usr/src/slmodem-2.9.10/drivers'
make[1]: Leaving directory `/usr/src/slmodem-2.9.10/drivers'
rm -f /usr/sbin/slmodemd
rm -f -rf /var/lib/slmodemmake
gcc -Wall -O3 -fomit-frame-pointer -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -I. -I/usr/src/linux/include -DMODVERSIONS --include /usr/src/linux/include/linux/modversions.h -o amrmo_init.o -c amrmo_init.c
<command line>:138829629:24448: /usr/src/linux/include/linux/modversions.h: No such file or directory
In file included from /usr/src/linux/include/asm/processor.h:18,
from /usr/src/linux/include/asm/thread_info.h:13,
from /usr/src/linux/include/linux/thread_info.h:21,
from /usr/src/linux/include/linux/spinlock.h:12,
from /usr/src/linux/include/linux/capability.h:45,
from /usr/src/linux/include/linux/sched.h:7,
from /usr/src/linux/include/linux/module.h:10,
from amrmo_init.c:47:
/usr/src/linux/include/asm/system.h: In function `__set_64bit_var':
/usr/src/linux/include/asm/system.h:193: warning: dereferencing type-punned pointer will break strict-aliasing rules
/usr/src/linux/include/asm/system.h:193: warning: dereferencing type-punned pointer will break strict-aliasing rules
amrmo_init.c: In function `amr_mod_usage_increase':
amrmo_init.c:232: warning: `MOD_INC_USE_COUNT' is deprecated (declared at /usr/src/linux/include/linux/module.h:502)
amrmo_init.c: In function `amr_mod_usage_decrease':
amrmo_init.c:236: warning: `MOD_DEC_USE_COUNT' is deprecated (declared at /usr/src/linux/include/linux/module.h:514)
amrmo_init.c: In function `amrmo_probe':
amrmo_init.c:264: error: structure has no member named `name'
amrmo_init.c:315: warning: implicit declaration of function `request_irq'
amrmo_init.c: In function `amrmo_remove':
amrmo_init.c:335: warning: implicit declaration of function `free_irq'
amrmo_init.c: In function `amrmo_init':
amrmo_init.c:369: warning: implicit declaration of function `pci_present'
amrmo_init.c:376: warning: implicit declaration of function `pci_for_each_dev'
amrmo_init.c:376: error: parse error before '{' token
amrmo_init.c: At top level:
amrmo_init.c:386: error: parse error before '}' token
amrmo_init.c:404: warning: type defaults to `int' in declaration of `EXPORT_NO_SYMBOLS'
amrmo_init.c:404: warning: data definition has no type or storage class
make: *** [amrmo_init.o] Ошибка 1