PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 5)

turone · May 7, 2017

anickolsky said:
Будет там не долго...

спасибо, скачал.
Пробую, но когда галочку ставишь установить creo view в windchill visualization, то говорит что не хватает Клиенты PTC Creo View - MCAD и ECAD 11.0+ - почему так не пойму, раньше вроде выбрать можно было. И еще я не сразу заметил, но в старой установке product analitics стоит соответственно не хватает PTC Windchill Product Analytics Process Adapter :beer:

anickolsky · May 10, 2017

turone said:
спасибо, скачал.
Пробую, но когда галочку ставишь установить creo view в windchill visualization, то говорит что не хватает Клиенты PTC Creo View - MCAD и ECAD 11.0+ - почему так не пойму, раньше вроде выбрать можно было. И еще я не сразу заметил, но в старой установке product analitics стоит соответственно не хватает PTC Windchill Product Analytics Process Adapter :beer:

Визуализация там...:beer:

turone · May 11, 2017

anickolsky said:
Визуализация там...

А PTC Windchill Product Analytics можно?

Так как думаю что апргейд без него может не пойти или с ошибками. :beer:

anickolsky · May 11, 2017

turone said:
А PTC Windchill Product Analytics можно? Так как думаю что апргейд без него может не пойти или с ошибками. :beer:

https://cloud.mail.ru/public/CUVv/pQyCELkiG
:beer:

ruswold · May 29, 2017

anickolsky, нет ли у вас bulk migrator версии 2.2? Спасибо.

anickolsky · Jun 28, 2017

Creo 4 M020
https://cloud.mail.ru/public/14zZ/Xi5GpXroE

botrox · Jun 28, 2017

А где же хэлп?)

dimeil · Jul 1, 2017

botrox said:
А где же хэлп?)

HELP

ArsenLTD · Jul 1, 2017

Ребята у кого есть доступ на PTC. Нужна : "Библиотека основных сборок станков доступна в Базе знаний PTC при поиске по ключевому слову "Machine Kinematics" на главной странице Pro/NC сайта www.ptc.com".

ruswold · Sep 27, 2017

Anickolsky, нет ли патча на Creo View 3.0 M031 (вместе с ECAD validate), от m020 не подходит, Последняя версия более менее работает с Windows XP 32 бит, m020 висит и не открывает документы из браузера.

vip3deluxe · Sep 27, 2017

Доброго времени суток!
Ребята, у кого есть доступ к этой статье, нужна:

хттпС://support.ptc.com/appserver/cs/view/case_solution.jsp?n=29445#_ga=2.143172469.1161509088.1506534267-1474898607.1506534267

ruswold · Sep 28, 2017

vip3deluxe said:
Доброго времени суток!
Ребята, у кого есть доступ к этой статье, нужна:

хттпС://support.ptc.com/appserver/cs/view/case_solution.jsp?n=29445#_ga=2.143172469.1161509088.1506534267-1474898607.1506534267

[HIDE="1"] How to configure access to Microsoft Active Directory in Windchill PDMLink
Created: 09-Sep-2011 | Modified: 08-Feb-2017

Available in: English

Applies To

Arbortext Content Manager
Windchill PDM Essentials
Pro/INTRALINK 8.x +
Windchill ProjectLink
Windchill PDMLink 6.2 to 11.0

Description

How to configure EnterpriseLdap to access a Corporate LDAP server.
How to configure JNDIAdapter to access a Microsoft Active Directory (AD , ADS) server.
How to configure Windchill PDMLink to access Microsoft Active Directory server.

Resolution

Prerequisites
- Refer to the article "How to configure access to an additional LDAP Directory in Windchill" which describes the general steps to configure Windchill to connect to an LDAP server.
- Also, consult the section Configuring Additional Enterprise Directories in the Windchill Help Center for further information on the required steps.
- The steps below discuss the specific steps when setting up access to Active Directory.
Configuring the JNDI Adapter for Active Directory:
During the configuration of the JNDI Adapter, the following changes should be considered.
Provider URL:
- Set the Provider URL to use the Active Directory Global Catalog port 3268 instead of the default LDAP port 389.
- Accessing the Global Catalog will give Windchill access to all objects in the Active Directory forest.
- The Global Catalog will only provide a limited subset of attributes compared to the LDAP port.
- For additional information on the Active Directory Global Catalog, see the following Microsoft Technet Articles:
  - Global Catalog and LDAP Searches
  - Add an attribute to the global catalog
Additional Properties:
All Additional Properties are of the form <Runtime Service Name>.<propertyName> = <value>.
The following Additional Properties should be considered for Active Directory.

<Runtime Service Name>.windchill.config.doesNotContainGroups:

As an external Corporate Directory it may not be appropriate for Windchill to use groups defined in AD.

<Runtime Service Name>.windchill.config.readOnly:

As an external Corporate Directory it may not be appropriate for Windchill to write to AD.
See "How to configure access to an additional LDAP Directory in Windchill" for additional details on these properties.

Schema attribute mapping:
The Active Directory schema does not match Windchill Directory Server.
At a minimum, the following Additional Properties must be added to map Windchill attributes to AD attributes.

<Runtime Service Name>.windchill.mapping.user.objectClass=user
<Runtime Service Name>.windchill.mapping.user.uid=sAMAccountName
<Runtime Service Name>.windchill.mapping.user.uniqueIdAttribute=sAMAccountName
<Runtime Service Name>.windchill.mapping.user.o=company

If .windchill.config.doesNotContainGroups is not set to true, then the following group schema mappings must be added:

<Runtime Service Name>.windchill.mapping.group.cn=cn
<Runtime Service Name>.windchill.mapping.group.objectClass=group
<Runtime Service Name>.windchill.mapping.group.uniqueIdAttribute=sAMAccountName
<Runtime Service Name>.windchill.mapping.group.uniqueMember=member

Directory Type:
The following Additional Property should be set to enable Windchill to support using paged results for large query results in AD:

<Runtime Service Name>.windchill.config.directoryType=ADS

User Organization Mapping:
The following Additional Property can be considered to map AD users to a specific Windchill Organization:

<Runtime Service Name>.windchill.mapping.usersOrganizationName

See How to map LDAP users to Windchill Organizations for additional information on mapping LDAP users to Windchill Organizations:

Filters:
The following Additional Property can be considered to additionally filter users in AD:

<Runtime Service Name>.windchill.mapping.user.filter
See CS24211 for more details on user filter

The following Additional Property can be considered to additionally filter groups in AD

<Runtime Service Name>.windchill.mapping.group.filter

See How to additionally filter users in LDAP to restrict access to Windchill for additional information on configuring these filters

For additional information , see the Help Center Topic Configuring Additional Enterprise Directories

2: Configuring the Repository

There are no differences when configuring a repository for an AD JNDI Adapter.

3: Setting Map Credentials:

There are no differences when configuring Map Credentials for an AD JNDI Adapter.
To find exactly Bind User DN it refers to following step:

- Open command window on the Active Directory server
- Run below command.
dsquery user.

4: Setting the Federated Directories property:

There are no differences when configuring the Federated Directories properties for an AD JNDI Adapter.

5: Configuring Apache Authentication:

Option 1
From a Windchill shell in the <Apache> directory, run the following command
ant -f webAppConfig.xml addAuthProvider -DproviderName=<NAME> "-DldapUrl=ldap://<LDAP Host>:<LDAP Port>/<SearchBase>?sAMAccountName?sub?(objectClass=user)" "-DbindDn=<Bind User DN>" "-DbindPwd=<Password>"
Where
<Name> is a uniquename for this adapter : CorpLdap
<LDAP Host> is the hostname of the LDAP server
<LDAP Port> is the port used by LDAP (optional)
<SearchBase> is the search base. Should match the base set in the JNDI Adapter, eg, ou=users,dc=mydomain,dc=com
<Bind User DN> is the full DN of the user that will connect to LDAP to perform the searches. Should match the DN used in step 3
<Password> the password of the bind user.

Option 2
1. Before 11.0, Edit Apache\conf\extra\app-Windchill-AuthProvider.xml.
After 11.0 , Edit Apache\conf\app-Windchill-AuthProvider.xml.
2. Add an additional provider section in the form,
<provider>
<name>Windchill-<adaptername></name>
<ldapUrl>ldap://<ldaphostname>:<ldapport>/<searchbase>?sAMAccountName?sub?(objectClass=user)</ldapUrl>
<bindDn><Bind User DN></bindDn>
<bindPwd><Password></bindPwd>
</provider>
Where
<adaptername> is a unique name for the adapter, eg CorpLDap
<ldaphostname> is the hostname of the LDAP server which should match the LDAP hostname in step 1
:<ldapport> is an optional port number if the LDAP server is not using port 389
<searchbase> is the search base for the LDAP server which should match the search base in step 1
<Bind User DN> is the user DN used to connect to LDAP which should match the DN used in step 3
<Password> is the password for this user which should match the password used in step 3
For example:
<provider>
<name>Windchill-CorpLdap</name>
<ldapUrl>ldap://corpldap.mydomain.com/ou=users,dc=mydomain,dc=com?sAMAccountName?sub?(objectClass=user)</ldapUrl>
<bindDn>cn=WCAccess,ou=users,dc=mydomain,dc=com</bindDn>
<bindPwd>password</bindPwd>
</provider>
3. From a Windchill shell in the Apache directory run
ant -f webAppConfig.xml regenWebAppConf
6: If AD users/groups need to be searched in Windchill, do the following:
Open Windchill Shell and run:
xconfmanager -t codebase\wt.properties -s wt.federation.org.directoryServices="$(wt.federation.org.defaultAdapter),$(wt.federation.org.enterpriseAdapter),<AD-JNDI-ADAPTER>" -p
eg.
xconfmanager -t codebase\wt.properties -s wt.federation.org.directoryServices="$(wt.federation.org.defaultAdapter),$(wt.federation.org.enterpriseAdapter),ts.enxp-wnc-91.jndiAdapter" -p[/HIDE]

anickolsky · Sep 28, 2017

ruswold said:
Anickolsky, нет ли патча на Creo View 3.0 M031 (вместе с ECAD validate), от m020 не подходит, Последняя версия более менее работает с Windows XP 32 бит, m020 висит и не открывает документы из браузера.

Уже 4.1 вроде... и патчи не выпускают а просто новые версии выходят, проверь на них

ruswold · Oct 2, 2017

anickolsky said:
Уже 4.1 вроде... и патчи не выпускают а просто новые версии выходят, проверь на них

Понял, попробую. Вся беда в том, что только ветка 3.0 поддерживается Windows XP

Kirill-kir · Oct 6, 2017

Проверьте, пожалуйста, кто может (Creo 4.0 m30), работает конвертация/сохранение чертежа в dwg? (конвертация в dxf - работает)

jurij_w · Oct 6, 2017

Kirill-kir said:
Проверьте, пожалуйста, кто может (Creo 4.0 m30), работает конвертация/сохранение чертежа в dwg? (конвертация в dxf - работает)

Работает!

vip3deluxe · Nov 14, 2017

Ребят привет!
Нужна статейка по ссылке:

хттпС://support.ptc.com/apps/solution_preview/solution/lang/presolution?lang=en&n=CS118548

Спасибо!

ruswold · Nov 16, 2017

anickolsky, есть ли у вас creo view java toolkit желательно на creo view 2 версии? Спасибо

caxit · Mar 20, 2018

PTC CREO5.0.0.0安装视频教程及软件下载
http://www.qsmjcn.com/group/3/thread/4

链接：https://pan.baidu.com/s/1aXj2_F_sMP7cUbTwbcpcJQ 密码：subs

ruswold · Mar 29, 2018

anickolsky said:
Windchill 11

Выложите пожалуйста Windchill Workgroup Manager 11 m030, спасибо.

PTC Pro / Engineer Wildfire v4.0 (5.0) (часть 5)

turone

Member

anickolsky

turone

Member

anickolsky

ruswold

Member

anickolsky

botrox

dimeil

ArsenLTD

Member

ruswold

Member

vip3deluxe

New member

ruswold

Member

anickolsky

ruswold

Member

Kirill-kir

New member

jurij_w

Member

vip3deluxe

New member

ruswold

Member

caxit

Member

ruswold

Member